BellinghamRecruiter Since 2001
the smart solution for Bellingham jobs

#982 - Metrology Technician - Swings

Company: Janicki Industries Inc.
Location: hamilton
Posted on: May 3, 2021

Job Description:

This position is for swing shift

POSITION DESCRIPTION

The Metrology Technician performs a variety of duties and multiple uses of different skillsets. Technicians are required to follow detailed instructions and drawings, in the inspection of tooling fixtures, precision weldments, machined surfaces and fly-away aerospace parts. Equipment maintenance, drawing interpretation, computational analysis and CAD/CAM software navigation are common tasks.

The following essential job functions are performed as a Metrology Technician:

Attention to detail and quality is required Understand and use the basic principles of linear and geometric dimensional metrology. Topics include basic measuring instruments; mechanical, electronic, pneumatic, and optical measuring instruments; quality data acquisition systems; coordinate measuring machines; attribute gauging, geometric functional gauging; surface integrity determination; and geometric profile measurement. Ability to read and understand blue-prints and / or CAD models Performs preventive maintenance on machines and facilities including daily inspections, weekly maintenance, and annual maintenance Receives and carries out directions from designated Supervisors and Production Leads Must be able to understand and comply with Safety Practices Complies with 5S, AS9100 and Nadcap Standards and Practices Identifies and obtains equipment, tools and materials needed to properly perform job function Sets up scaffolding and safety barriers under direction Properly executes Hazardous Material Disposal activities Performs preventive maintenance on machines and facilities as required Knowledge of common hand tools and demonstrated mechanical capabilities Performs on the job training, AS9100, Nadcap training and other training as required Performs other duties as assigned Must work well under pressure, meeting and completing multiple deadlines. The incumbent shall, at all times, demonstrate cooperative behavior with colleagues and supervisors. Being at work on time and maintaining good attendance is a condition of employment and is an essential function of the job.

QUALIFICATIONS

Due to our ITAR and EAR regulations, applicants must be a US Citizen or of Legal Permanent Resident Status as defined by 8 U.S.C. 1324b (a) (3).

EDUCATION/EXPERIENCE

High School diploma or GED required, additional CAD-based experience is preferred Two year technical degree preferred Experience with sensitive, calibrated equipment is preferred Must have general computer competency Must have effective verbal and written communication skills Welding experience is strongly preferred

ADDITIONAL JOB DUTIES

Job duties may include one or more of the following:

Work in a quality capacity to an auditable level of consistency Utilize several sophisticated software programs to allow comprehensive analysis of measurement data for customers. Types of analysis may include: Best Fit Analysis of point data to surface models, Tool & Part Comparisons to engineering CAD Models/Datasets, 5-axis Milling machine Alignment (volumetric compensation, accuracy and repeatability), and Composite Lay-up Stock Analysis. Advanced Assembly Procedures, will include detailed hardware installation, plus in-process and final assembly of a wide variety of tooling, parts, and models. Inspects visually or checks a few points of small parts with acceptance limits clearly defined or reference samples furnished. Ability to read and understand blue-prints and / or CAD models Janicki Certified, Overhead Crane, Forklift and Manlift Operation (as separate Certifications) Operation of Pneumatic and Power tools, drills, grinders, saws, impact drivers, sanders, etc. Operation of Bench Power Tools, - Horizontal / Vertical Bandsaw, Bench Grinder, drill press, vertical mill/lathe, drill bit sharpener, scissors sharpener, table saw, miter saw. etc. Perform aerospace tool finishing utilizing sanding, grinding of exacting tolerances on flat surfaces and compound curves as well as doing detailed patch/repairs on the same Understanding of mill gauging procedures Prepare surfaces and apply filled resins or comparable for repairs

WORKING CONDITIONS

Must be able to perform repetitive tasks for an entire shift. Must be able to sit, stand, or crouch down for extended periods. Must be able to climb ladders and work platforms. Exposed to noise, dust, dirt, and paint fumes. Must be able to work under hot and cold conditions. Personal protective equipment (PPE), safety glasses and respirator will be required. Must be comfortable working within confined spaces and at various heights.

Janicki Industries is an Equal Opportunity Employer. Janicki Industries does not does not discriminate on the basis of race, color, religion, sex, national origin, sexual orientation, marital or familial status, physical or mental disability, genetic information, age, retaliation, veteran/military service status, or any other legally protected status.

Applicants or employees wishing to view a copy of Janicki Industries Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at (360) 404-1997.

Keywords: Janicki Industries Inc., Bellingham , #982 - Metrology Technician - Swings, Other , hamilton, Washington

Click here to apply!

Didn't find what you're looking for? Search again!

I'm looking for
in category
within


Log In or Create An Account

Get the latest Washington jobs by following @recnetWA on Twitter!

Bellingham RSS job feeds